Scope Of Delivery; Functional Description - Abicor Binzel Robo Instructivo De Servicio

4 Scope of delivery

4 Scope of delivery
• Complete air-blast and injection unit
Tab. 4 Scope of delivery
4.1 Transport
Checking procedure
on receipt of goods
In case of damage
In case of complaints
Packaging for return
shipment
Tab. 5 Transport
4.2 Storage

5 Functional Description

EN - 6
Order data and ID numbers for the equipment parts and wear parts can be
found in the current ABICOR BINZEL spare parts and wear parts lists. The
contact for consulting and ordering can be found in the Internet
at www.binzel-abicor.com.
The scope of delivery is carefully checked and packaged, however damage
may occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the delivery for damage (visual inspection)!
If the delivery has been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Storage conditions in closed environments:
 See Tab. 2 Ambient conditions on page EN-4
The Air-blast and injection unit is used in automated cleaning processes
for injecting and air-blasting the interior of the gas nozzle with a dosed
quantity.
The 2/2 directional valve is controlled by the output signal of the robot control.
The compressed air flows through the injection oiler actuating a pneumatic
dosing pump which adds an adjustable quantity of anti-spatter agent to the air
flow.
The air-blast time depends on the length of the assembly; it must be selected so
that the compressed air with anti-spatter agent is completely blown through.
When the pressure is relieved, the dosing pump is again filled with anti-spatter
agent from the repository and is ready for the next stroke.
Air-blast and injection unit
• Operating instructions