Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel Robo Instructivo De Servicio

Air-blast and injection unit
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 Information regarding the EU Declaration of Conformity

1.2 Responsibilities of the user

The Air-blast and injection unit is used in automated cleaning processes
for injecting and air-blasting the interior of the gas nozzle with a dosed
quantity.
It is an accessory for ROBO welding torches and hose assemblies and is
designed for industrial and commercial use for skilled personnel only.
These operating instructions only describe Air-blast and injection unit. It
may be exclusively operated using original ABICOR BINZEL spare parts.
according to the EC Directives:
Machinery Directive 2006/42/EC
Low-Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC.
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
hereby declare that, on the basis of its design and construction and in the
present version, the product described in these operating instructions complies
with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Air-blast and injection unit
EC Low-Voltage Directive 2006/95/EC
DIN EN 60 974-10, EN 292, EN ISO 9001
Within the EEA (European Economic Area), the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (2004/108/EC) and that the signal
utilisation of the integrated welding current monitoring against stray currents is
installed properly.
1 Identification
EN - 3