Repairs; Sending For Repair - BRAND accu-jet S Instrucciones De Manejo

10 Repairs

10.1 Sending for repair

Transporting of hazardous materials without a permit is a violation of
federal law.
Clean the instrument thoroughly and decontaminate!
• When returning products, please enclose a general description of the
type of malfunction and the media used. If information regarding
media used is missing, the instrument cannot be repaired.
• Only send the device without a battery installed.
• Shipment is at the risk and the cost of the sender.
Outside USA and Canada
Complete the "Declaration on Absence of Health Hazards" and send the
instrument to the manufacturer or supplier. Ask your supplier or manu-
facturer for the form. The form can also be downloaded from
www.brand.de.
Within USA and Canada
Please clarify the requirements for the return delivery with BrandTech Sci-
entific, Inc before sending the instrument in for service.
Return only cleaned and decontaminated instruments to the address pro-
vided with the Return Authorization Number. Place the Return Authoriza-
tion number so that it is clearly visible on the outside of the package.
9974 18
NOTICE
10 Repairs
Operating manual
55