Assembly Instructions; Battery & Electric Operation - Medela Double Deluxe Instructivo De Uso

XDouble Deluxe BreastpumpX
™

Assembly Instructions

1 2
Snap the white membrane Press the valve assembly
onto the valve until mem- onto the breastshield.
brane lies completely flat.
Be sure to separate
membranes and valves
when cleaning and com-
pletely dry prior to
reassembly.
4
Align the raised line on the
motor unit with the raised
line on the shield and press
the motor firmly onto the
shield with the single
adapter attached.
4
3
Screw the container onto
the breastshield or use dis-
posable CSF Collection,
™
Storage & Freezer Bags
article #87010 or #87013
(sold separately)
.
5
Lock the motor onto the
shield by rotating 1/8 turn
clockwise. The white plug-
in port on the motor unit
should be aligned with the
hole on the breastshield.
6 7
For single pumping, insert For double pumping, insert the smaller end of the tubing
the small plug of the single into the plug-in on the motor unit, and the larger end of the
adapter into the hole on the tubing into the second breastshield (the one not attached to
breastshield and firmly the motor unit)
push into the plug-in port
on the motor unit. This plug
should be inserted into the
holder when not in use.
Battery Operation
While the pump will work
1
with either alkaline, dispos-
able or nicad rechargeable
batteries, alkalines are rec-
ommended; the pump will
cycle more quickly, pump
longer and run more quietly.
To install batteries, slide off
the battery compartment
cover. Install two fresh AA
1.5 V batteries (alkaline
preferred).
Double Deluxe BreastpumpXX
™
CAUTION:
When using the pump with
batteries, the pumping cycle
may slow as the batteries wear
down. Slower cycles may cause
some discomfort because the
vacuum will be held longer on
the breast. If this happens,
reduce the vacuum with the
adjustment regulator
replace the batteries with fresh
ones as soon as possible.
NOTE:
The batteries do not need to
be removed to use electricity to
power the pump.
and
5