Ivoclar Vivadent CRT buffer Instrucciones De Uso página 2

4. Carefully remove the CRT buffer test strip from
the packaging without touching the yellow test
field.
5. Place test strip on a stable, absorbent paper with
the yellow test field facing upwards.
6. Wet the entire yellow test field with saliva using
a pipette.
Note:
– Allow saliva to drop off. Do not scratch the
test field with the pipet.
– Prevent the formation of bubbles in the saliva.
7. To determine the buffer capacity of saliva,
compare the colour of the test field with the
colour samples (pictures) after exactly 5 minutes
of reaction time.
Evaluation
Blue indicates a high, yellow a low buffer capacity
of saliva.
Note
– If the test field is blotchy, rate the buffer capacity
according to the most unfavourable of the
colours present.
– If in doubt, repeat the test.
Disposal
Dispose of used test strips with normal practice
waste.
Storage
– Store CRT buffer at room temperature (12–28 °C
/ 54–82 °F)
– Shelf life: see date of expiration
– Do not use CRT buffer after the indicated date of
expiration
Keep out of the reach of children.
For use in dentistry only.
Date information prepared:
05/2003
Ivoclar Vivadent AG
FL-9494 Schaan/Liechtenstein
This product has been developed solely for use in dentistry.
Processing and application should be carried out strictly according to the Instruc-
tions for Use. Liability cannot be accepted for damages resulting from failure to
observe the Instructions or the stipulated area of application. The user is
responsible for testing the material for its suitability and use for any purpose not
explicitly stated in the Instructions. Descriptions and data constitute no warranty of
attributes and are not binding.