the treated surfaces.
5–2. CLEANING THE FILER HOLDER
Regularly clean the filter holder (10-22),
the filter (19-20-21) and the shower
screen located in the group head
(11) with warm water and a neutral
detergent to prevent scale and to
remove any coffee deposits.
Warning: To prevent damaging
the machine, do not use the blind
filter for cleaning the group head.
5–3. CLEANING THE STEAM PIPE
To avoid altering the taste of the drinks
to be heated and to prevent the holes
in the end of the steam pipe from
becoming clogged, clean the steam pipe
thoroughly with a damp cloth after every
use.
5–4. CLEANING THE AUTOMATIC
CAPPUCCINO MAKER
Remove any milk residues each time the
Automatic Cappuccino maker is used.
• Place a full glass of water next to the
machine in which to immerse the
Suction tube.
• Proceed as if you were preparing a
normal cappuccino, allowing the dirty
water to drain into a suitable container.
• To replace the steam pipe (12-12a),
follow the instructions in section 4.9.
• In addition to cleaning the Automatic
Cappuccino maker after each use,
every now and again clean it more
thoroughly.
• Turn the threaded locking ring (A)
anticlockwise until the steam nozzle is
released (Fig. F)
• Remove the cover (D), the pin (C) and
the pipe (B) and wash them thoroughly
under warm running water to
eliminate residues or hardened lumps
of milk. Then replace the components
in the reverse order.
29