Maintenance And Cleaning - Abicor Binzel ROBO Compact W600 Instructivo De Servicio

9 Maintenance and cleaning

9 Maintenance and cleaning
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
DANGER
Risk of burns
Risk of burns from hot coolant and hot surfaces.
• Switch off the coolant recirculator before starting maintenance, servicing, assembly,
disassembly and repair work.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Check the coolant hose, seals and connectors for damage or leaks and replace if
necessary.
• Always wear your personal protective clothing when performing maintenance and
cleaning work.
• Remove any adhering weld spatter.
• Ensure that all threaded fittings are tight.
EN - 18
ROBO Compact W600
BAL.0374.0 • 2019-04-01