Galletti MYCOMFORT LARGE Manual Del Usuario página 36

MYCOMFORT LARGE
- P14 = AOUT1/2 configuration: configuration of the two analog outputs 0-10V
depending on the type of fan ( non-modulating or modulating) and the type of
valve(s) (ON/OFF or modulating). For further details see "Configuration of analog
outputs".
ACCESS TO PARAMETER CONFIGURATION PROCEDURE
GB
switch the thermostat off
- push the
- Use keys
value "10", and press
If it is correct, you will have access to the parameters
value of selected parameter
selected parameter: P..
- Use keys
list" described above)
- press to confirm the parameter change (the value will start flashing)
- use keys
- press to save the new value setting or
modification
- after completing the modification of the parameters concerned press key
FC66002638 - rev. 05
È severamente vietata la riproduzione anche parziale di questo manuale / All copying, even partial, of this manual is strictly forbidden
at the same time
to modify the display value up to the password
.
selected parameter description
to scroll the various parameters (see "Parameter
selected parameter description
to change the value
to exit the procedure
NB: the parameter configuration phase is of limited duration. Once a certain time
has elapsed (around 2 minutes) the thermostat will switch back into the Off
status and only the saved changes will be retained.
AVAILABLE CONFIGURATIONS (PARAMETER P00)
The LCD controller can be configured in various ways according to the type
of system. Various configurations can be obtained through the P00 parameter
(see configuration procedure of controller parameters).
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 3
- Summer/winter switching logic: local
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 3
- Summer/winter switching logic: remote
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 3
- Summer/winter switching logic: water
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 4
- Summer/winter switching logic: local
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 4
- Summer/winter switching logic: remote
- System pipes: 2
- Valve: no
- Heating element: no
- Speeds: 4
- Summer/winter switching logic: water
- System pipes: 2
- Valve: no
to cancel the
- Heating element: yes
- Speeds: 3
- Summer/winter switching logic: local
36