Siemens SIMATIC S7-1500 Manual De Usuario página 25

Web browser (external)
Any browser
OPC UA (external)
Any OPC UA client device
Any OPC UA server device
Add-ons to CPU 1505SP (F/T/TF), CPU 1507S (F), CPU 1508S (F) Version 2.6
A5E45929273-AD, 07/2019
Special features
Requirements
You have enabled the Web server.
•
You have enabled operation over the respective interface.
•
Via PC communication interface
IP address: As the connected Windows Ethernet interface
•
Port number: Configure as in the display application (default: 81/343)
•
Via runtime communication interface
With IP Routing or NAT Routing set up under Windows
•
– IP address: IP address of the runtime communication interface
– Port number: Default
With port forwarding set up under Windows
•
– IP address: IP address of the Windows Ethernet interface
– Port number: Default
Special features
Supported communication methods
Data access to any (configured) data
•
Method call
•
Requirement
You have enabled OPC UA.
•
Addressing the CPU via external client
With IP Routing or NAT Routing set up under Windows
•
– IP address: IP address of the runtime communication interface
– IP port: Default
With port forwarding set up under Windows
•
– IP address: IP address of the connected Ethernet interface
– IP port: Default
– Note: Some OPC UA clients do not support operation via port forwarding.
Addressing of the external server via CPU client
With IP Routing or NAT Routing set up under Windows
•
– IP address: IP address of the external client
– IP port: Default
With port forwarding set up under Windows
•
– IP address: IP address of the Siemens RT-VMM network adapter
– IP port: Default
25