Siemens SIMATIC S7-1500 Manual De Usuario página 33

SIMATIC IPC647D / IPC847D
If you are using a SIMATIC Rack PC supported by the CPU, note the following reference information for your device:
Property
Hardware version SIMATIC IPC 647D: FS ≥ AE
SIMATIC IPC 847D: FS ≥ AE
BIOS version V19.01.11
Operating systems •
•
Graphics driver Version for Windows 7:
•
•
Version for Windows 10:
•
Available on supplied Documentation and
Drivers DVD 09/2017.
LED use Not supported
Mass storage The following configurations with RAID are
supported:
RAID1, 1 TB (2x 1 TB HDD SAS, mirror disks)
in removable frame, hot-swap, frontside-
mounted???; PCIe x8 RAID Controller incl.
ZMCP module (2 slots occupied) +
1x 240 GB SSD (for OS) in removable frame.
Using onboard interfaces for PROFINET or PROFIBUS:
PN / IE (LAN) X1 Not supported
PN / IE (LAN) X2 Yes
PROFINET (LAN) X3 Not supported
(CP 1616 onboard)
MPI / DP X4 Yes, as of FW V1.03.08.046.
(CP 5622 onboard)
BIOS setting Wake up on LAN (X2 P1)
Add-ons to CPU 1505SP (F/T/TF), CPU 1507S (F), CPU 1508S (F) Version 2.6
A5E45929273-AD, 07/2019
Windows 7 Ultimate (32-bit or 64-bit)
Windows 10 Enterprise LTSB 2016 (64-bit)
32-bit: 15.36.18.4156
64-bit: 15.36.18.64.4156
15.40.36.64.4703
Notes
The hardware version can be found on the
rating plate of your SIMATIC IPC.
Operation with Windows 10 requires a
•
Windows installation in Legacy mode. Win
10 Legacy boot handling
(https://support.industry.siemens.com/cs/ww
/en/view/109749498)
When you use remote management, e.g.
•
iAMT, for your IPC, a Windows restart is not
supported.
Only the graphics driver on the Documentation
and Drivers DVD ≥ 06/2015 supports the
"Windows Reboot" functionality.
If you did not receive the Documentation and
Drivers DVD with the SIMATIC IPC, contact
Customer Support.
The installation of the operating system and the
Software Controller must take place on the SSD
that is connected over the AHCI controller.
Following restriction for operation with RAID:
Windows restart after a blue screen
•
Windows restart as of firmware version 7.10-
•
0 (33072) and the release version
MR2016.2
For availability of the FW see SIMATIC Product
Information
(https://support.industry.siemens.com/cs/ww/en/
view/92275417)
Activate the "Wake up on LAN" option in the
BIOS
33