Siemens SIMATIC S7-1500 Manual De Usuario página 29

SIMATIC IPC227E / IPC277E
If you are using a SIMATIC Nanobox PC supported by the CPU, note the following reference information for your device:
Property
Hardware version FV ≥ AB
BIOS version V20.01.11
Operating systems •
•
•
•
LED use IPC227E: Supported, configurable
IPC277E: Not supported
NVRAM use Supported, 135 KB can be used
Mass storage
Using onboard interfaces for PROFINET or PROFIBUS:
PN / IE (LAN) X1 Not supported
PN / IE (LAN) X2 Yes
The SIMATIC Nanobox PC does not support PROFIBUS CP5623.
External monitor via DisplayPort on IPC277E
To apply a changed monitor configuration on an external monitor, restart the entire PC system.
Add-ons to CPU 1505SP (F/T/TF), CPU 1507S (F), CPU 1508S (F) Version 2.6
A5E45929273-AD, 07/2019
Windows Embedded Standard 7 E SP1 (32-
bit or 64-bit)
Windows Embedded Standard 7 P SP1 (32-
bit or 64-bit)
Windows 7 Ultimate (32-bit or 64-bit)
Windows 10 Enterprise LTSB 2016 (64-bit)
Notes
The hardware version can be found on the
rating plate of your SIMATIC IPC.
To guarantee correct operation, update the
BIOS to the specified version or higher.
Operation with Windows 10 requires a
•
Windows installation in Legacy mode. Win
10 Legacy boot handling
(https://support.industry.siemens.com/cs/ww
/en/view/109749498)
During a Windows restart, you may
•
sporadically experience a blue screen. See
the section "Restarting Windows" in the
manual
(https://support.industry.siemens.com/cs/ww
/en/view/109740725) for the
Software Controller.
Operating system installation on CFast (internal
or external) < 16 GB
29