Siemens SIMATIC S7-1500 Manual De Usuario página 32

SIMATIC IPC627D / IPC827D / IPC677D
If you are using a SIMATIC Box PC supported by the CPU, note the following reference information for your device:
Property
Hardware version SIMATIC IPC 627D: FS ≥ AG
SIMATIC IPC 827D: FS ≥ AF
SIMATIC IPC 677D: FS ≥ AJ
BIOS version V19.02.10
Operating systems •
•
•
Graphics driver Version for Windows 7:
•
•
Version for Windows 10:
•
Available on supplied USB flash drive with
version 12/2017
LED use Supported
NVRAM use Supported, 35 KB can be used
Mass storage
Using onboard interfaces for PROFINET or PROFIBUS:
PN / IE (LAN) X1 Not supported
PN / IE (LAN) X2 Yes
PROFINET (LAN) X3 Not supported
(CP 1616 onboard)
MPI / DP X4 Yes, as of FW V1.03.08.046.
(CP 5622 onboard)
BIOS setting Wake up on LAN (X2 P1)
Special features in case of failsafe
The CPU 1507S F needs NVRAM (buffered SRAM) for operation. To use the CPU 1507S F on these IPCs, the following
ordering options are available under "Processor" during configuration:
● Options with onboard "PROFIBUS DP/MPI (CP 5622 compatible); 2 MB buffered SRAM"
● Options with onboard "PROFINET (IRT, 3 ports, CP 1616 compatible); 2 MB buffered SRAM"
32
Windows Embedded Standard 7 P SP1 (32-
bit)
Windows 7 Ultimate (32-bit or 64-bit)
Windows 10 Enterprise LTSB 2016 (64-bit)
32-bit: 15.36.18.4156
64-bit: 15.36.18.64.4156
15.40.36.64.4703
Notes
The hardware version can be found on the
rating plate of your SIMATIC IPC.
Operation with Windows 10 requires a
•
Windows installation in Legacy mode. Win
10 Legacy boot handling
(https://support.industry.siemens.com/cs/ww
/en/view/109749498)
When you use remote management, e.g.
•
iAMT, for your IPC, a Windows restart is not
supported.
Only this graphics driver supports the "Windows
Reboot" functionality.
If you did not receive a USB flash drive with the
SIMATIC IPC, contact Customer Support.
Configurations with RAID are not supported.
For availability of the FW see SIMATIC Product
Information
(https://support.industry.siemens.com/cs/ww/en/
view/92275417)
Activate the "Wake up on LAN" option in the
BIOS
Add-ons to CPU 1505SP (F/T/TF), CPU 1507S (F), CPU 1508S (F) Version 2.6
A5E45929273-AD, 07/2019