Tool Specifications; Machine Elements; Intended Use; Battery Pack - Würth master ANG 14 Traducción Del Manual Original

0702 915 5.book Seite 10 Montag, 12. Juli 2010 9:25 09

Tool Specifications

Cordless riveting tool
Article number
Total stroke
Pulling force
Weight
Capacity range:
Nosepiece Rivet-Ø
[mm]
17/24 3.0/3.2
4.0
17/24 4.0
17/29 4.0
4.8/5.0
17/32 4.8/5.0
Battery
Article number
1.3 Ah
2.6 Ah
Rated voltage
Amount of cells
Battery type
Capacity
Weight
Battery charger
Article number
Input voltage
Output voltage
Charging current (max.)
Charge duration
1.3 Ah
2.6 Ah
Weight
10
1 Nosepiece
2 Outer sleeve
ANG 14
3 Eye hook
0700 915 5
4 Mandrel collector
20 mm
5 Nosepiece magazine
8.5 kN
6 LED overload
2.0 kg
7 On/Off switch

8 Battery pack

9 LED indicator
10 Charger port
Material
11 Hand-guard
Not all of the accessories illustrated or described are included
Aluminium, Steel, as standard delivery.
Stainless steel
Aluminium
Steel
The tool is intended for the setting of rivets.
Stailess steel
This charger is intended for charging Würth lithium
Aluminium
ion batteries (1.3 Ah/2.6 Ah) with a voltage of
Steel
14.4 V.
The user is responsible for damage caused by usage
Li-Ion
other then intended.
0700 915 13
0700 915 26
14.4 V
4/8
Li-Ion
Convince yourself before using that the battery pack
1.3 Ah/2.6 Ah
is securely seated in the machine.
0.35 kg/0.5 kg
The battery pack must be charged before initial op-
eration.
With proper use, the battery pack can be recharged
0700 915 220
up to 1000 times.
220–240 V
A new battery pack will not reach its full capacity un-
50–60 Hz
til after approx. 5 charging- and discharging cycles.
14.4 V
This also applies for battery packs, which have not
1.5 A
been used for extended periods.
Never run down the battery pack completely.
50 min
100 min
An extended service life expectancy is reached
when a load is put on the battery pack regularly and
0.5 kg
it is recharged afterwards.
When not storing the battery pack in the recharger,
ensure to recharge it from time to time.
A considerably reduced operating time despite
charging indicates, that the battery pack is used up
and must be replaced.

Machine Elements

Intended Use

Battery Pack
Use only the battery pack intended for this
power tool.