Safety Notes; Important - AL-KO BC 1000 E Instrucciones De Uso

neither is it intended to be used by people
lacking experience and/or knowledge unless
they are supervised by someone who is
responsible for safety, or receive instructions
from this supervisory person in how to ope-
rate the tool. Children should be supervised
in order to make sure that they do not play
with the tool.

Important!

The machine is not allowed to be used in
commercial applications!
Meaning of the symbols on the machine
Important!
Read the instructions for use
Wear protective glasses and ear
defenders
Wear protective gloves
Wear safety boots
Keep people away. Safety distance
min. 10 m
Danger due to objects being thrown
out
Immediately disconnect the plug
from the mains if the extension
cable has been damaged or cut
Protect the machine against rain
and moisture
Make sure there is a gap of at least
15 m between the machine and
other people
440102 _c

Safety notes

Important!
The cutting tool continues to rotate even after
the motor has been switched off!
Before using mains and extension cables, check
„
them for any signs of damage or ageing.
Keep extension cables away from the cutting
„
tools.
If the cable becomes damaged during use, im-
„
mediately disconnect from the mains.
DO NOT TOUCH THE CABLE UNTIL IT HAS
BEEN DISCONNECTED FROM THE MAINS.
Wear suitable clothing, eye protection and
„
gloves.
Never allow children or uninstructed persons to
„
operate or maintain the machine. Local regula-
tions may specify the minimum age of people
operating the machine.
Stop using the machine when people, especially
„
children (and also pets) are in the vicinity.
Only mow during daylight hours or with good
„
artificial lighting.
Before taking the machine into operation, and
„
following any impact, check the machine for
signs of wear or damage and undertake the ne-
cessary repairs.
Never use the machine if any protective devices
„
are damaged or missing.
Always keep hand and feet away from the cut-
„
ting device, above all when switching on the
motor.
Any device that is used for cutting off the line
„
represents a danger of injury.
After pulling out a new line, always hold the
„
machine in its normal working position before
switching it on.
Never fit metallic cutting elements.
„
Only use genuine spare parts and genuine ac-
„
cessories.
Disconnect the mains plug before carrying out
„
any checks, cleaning or work on the machine,
and when it is not in use.
Make sure that air openings are free from con-
„
tamination.
In spite of technical and additional protective
„
measures, there is always a residual risk when
working with the machine.
Keep handles dry and clean.
„
Remove foreign bodies from the working area.
„
EN
15