Kobalt SGY-AIR70TZ Manual De Instrucciones página 9

OPERATING INSTRUCTIONS
The paint sprayer will not properly spray unless
the fan direction is either horizontal or vertical.
1. Adjust the direction of fan to be either horizontal
or vertical.
To adjust, loosen the air cap ring (J) 90 degrees.
Hand tighten the air cap right (J) after
adjustment (See Figure 1).
2. Set pattern size for desired shape.
For full pattern, open pattern control knob (F)
by turning counterclockwise. For a round
pattern, turn pattern control knob (F) clockwise
(See Figure 2).
3. Before spraying turn the fluid control knob (G)
clockwise until closed. Begin spraying and
slowly adjust the fluid control knob (G)
(See Figure 3).
WA R N I N G
1
Air Cap
Air Cap Ring
2
3
9
Horizontal Fan
Vertical Fan