Displaying And Checking The Settings - Leica RANGEMASTER 2400-R Instrucciones

Settings
– When the device is switched on:
wait until the display turns off.
– When the device is not switched on:
begin with Step 1.
1. Press and hold the secondary button
• appears.
USEU
2. Press the secondary button briefly 3x (<2 s).
• The display changes.
3. Select the desired setting (
pressing the main button
4. Save your setting by briefly pressing the
secondary button.
• The saved setting is initially lit continuous-
ly for 4 s as confirmation, then the display
disappears.
(≥ 3 s).
1
/ ) by
EHr ON OFF
repeatedly.
2

DISPLAYING AND CHECKING THE SETTINGS

You can display values at any time to check your
settings.
Press the secondary button
• The selected measurement system (
and (only if the function is activated) will
EHr
appear below the reticule (e.g. instead of the
distance) alternating for 2 s each.
briefly 2x.
1
or )
EU US
EN
41