Zoeller Basement Sentry STBS700 Manual De Instrucciones página 6

CONNECTING THE STBS700 PUMP TO THE CONTROLLER (CONTINUED)
Use the Mobile App (iOS and Android) (Continued)
4. Once a location is created, you will need to add a device. To
add a device, choose the desired location name and then
touch the "+" to start adding a device. Allow access to the
camera so you can scan the data matrix.
5. The app will ask you to scan the data matrix QR code on the
controller. You can also bypass this step and manually input
the SSID of the controller, which is found on the controller
label.
6
© 2020. All rights reserved.
4
Touch + to
add a device
5
Click to manually input SSID
SSID input field