Invacare InTouch ITFG Manual Del Usuario página 2

Important Information
The best way to avoid problems related to pressure sores is to understand their causes and your role in
a skin management program.
Your therapist and physician should be consulted if you have questions regarding individual limitations
and needs.
All cushions should be selected carefully. Working with your therapist, and physician is the best way to
assure that a cushion choice matches your individual needs.
As the needs of the individual become more complex, cushion evaluation becomes more important.
Introduction
The Flovair cushion is designed to provide pelvic stability, leg positioning and pressure management for
patients with postural asymmetry and skin integrity concerns. The Flovair cushion is available in two
different contours to suit the amount of positioning required by the user.
Outer/Inner Covers
The outer cover is made from a water resistant fabric to protect the foam. The top is fabricated from a
stretch fabric. The bottom is fabricated from a heavyweight, non‐skid fabric.
A water resistant inner cover allows air circulation while providing additional protection for the foam.
Cushion Inspection and Cleaning
Regular cleaning and inspection of the outer and inner covers is recommended.
WARNING
DO NOT continue to use this product if any of the upholstery materials, foams, and/or plastics are
found to be deformed, breaking, worn, and/or compressed. Corrective maintenance can be per-
formed at or arranged through your equipment supplier.
Outer Cover
CAUTION
DO NOT use fabric softeners or bleach. DO NOT machine dry. Air dry only. DO NOT dry in sun.
Machine wash the outer cover in cold water on gentle cycle using a mild detergent.
Inner Cover
Hand clean the inner cover using a soft cloth, warm water and a mild soap solution. Rinse off and hang
dry.
Foam
Wipe the foam with a damp cloth. DO NOT submerge or soak.
2
InTouch™ Flovair Cushion Part No 1141447