Invacare InTouch ITFG Manual Del Usuario página 7

Removing/Installing Removable Leg Wedges
NOTE: For this procedure, refer to FIGURE 5.
NOTE: This procedure provides 1‐inch of lower seat to floor height on one side of the cushion. This modification
allows for easier foot propelling or the accommodation of some hip flexion limitations.
NOTE: This modification can be done on either side of the cushion.
1. Remove the cushion from the inner and outer covers. Refer to Removing/Installing the cushion
covers on page 4.
2. Remove the pelvic support layer. Refer to Removing/Installing the pelvic support layer on page 6.
3. Remove the front leg wedge from the side of the cushion that requires a lower cushion to floor height.
Save the leg wedge for future use.
NOTE: Leg wedges secure in place with hook and loop strips.
4. Reinstall the pelvic support layer. Refer to Removing/Installing the pelvic support layer on page 6.
5. Reinstall cushion into inner and outer covers. Refer to Removing/Installing the cushion covers on
page 4.
NOTE: This modification can be
done on either side of the cushion.
Removable Leg Wedges
Part No 1141447
FIGURE 5 Removing/Installing Removable Leg Wedges
Top of cushion
Bottom of cushion
Hook and Loop Strips
7
InTouch™ Flovair Cushion