Tabla de contenido
Publicidad
Precision Spectra™ OMG™ Adapter
Programming the Boston Scientific
ETS
1. Link the Precision Spectra Clinician
Programmer (CP) to the Boston Scientific ETS
per the standard procedure.
2. Use the Bionic Navigator 3D Software to
program the Boston Scientific ETS. Refer to
the list of competitor leads for guidance in
selecting the programming mode to use with
the lead.
Disconnecting the Precision Spectra
OMG Adapter
1. Turn OFF stimulation.
2. Disconnect the Boston Scientific ETS from the
Precision Spectra OMG Adapter.
3. Disconnect the Precision Spectra OMG Adapter
from the OMG Connector.
4. Disconnect the proximal end(s) of the Medtronic/
St. Jude (Abbott) OR Cables from the OMG
Connector.
CAUTION
Failure to turn off the Boston Scientific ETS
before disconnecting the Precision Spectra
OMG Adapter may result in excess stimulation.
Cleaning the Precision Spectra OMG
Adapter
The Precision Spectra OMG Adapter can be
cleaned using a mild detergent applied with a
lightly dampened cloth or tissue. Residue from
soapy detergents should be removed with a cloth
lightly dampened with water. Do not use abrasive
cleansers for cleaning.
Note: If no longer needed, the Precision Spectra
OMG Adapter should be returned to
Boston Scientific for disposal.
Precision Spectra™ OMG™ Adapter
92089844-02 4 of 81
Customer Service - USA
In USA, to order replacement parts, or for answers
to any questions you might have, please contact the
Customer Service Department:
• Phone: (866) 360-4747, +1 (661) 949-4747
• Fax: +1 (661) 949-4022
• Boston Scientific Neuromodulation
Corporation
25155 Rye Canyon Loop
Valencia, CA 91355, USA
Outside USA, if you have a specific question or
issue, please contact your healthcare professional.
Customer Service - Outside USA
If you have any other questions or need to contact
Boston Scientific, choose your locality from the
contact list at the end of this document.
Publicidad
Tabla de contenido
