Menu Items In The Setup Menu; Standby; Wifi Access Point - Fronius Symo 10.0-3 208-240 Manual De Instrucciones

Menu Items in the Setup Menu

Standby

Manual activation/deactivation of the standby mode
-
-
-
-
-
-
Setting standby mode (manual shutoff for feeding energy into the grid):
1
2
The display alternates between "STANDBY" and "ENTER."
The Standby mode is now activated.
The Startup LED lights up orange.
Restoring the grid feed:
In Standby mode, the display alternates between "STANDBY" and "ENTER."
1
The "Standby" item is displayed.
The inverter also switches to the Startup phase.
After the grid power feed operation is restored, the Operation Status LED lights up green.
WiFi Access For activating / deactivating of the WiFi Access Point (e.g. to set a system monitoring)
Point
Adjustment range
30
No power is fed into the grid.
The Startup LED lights up orange.
In standby mode, no other menu item can be accessed or set in the menu level.
The automatic switching to the "NOW" menu item after 2 minutes if no key is pressed
is not activated.
The Standby mode can only be deactivated manually by pressing the "Enter" key.
Grid supply operation can be resumed at any time (deactivate "Standby").
Select the "Standby" item
Press the "Enter" key
Press "Enter" to restore the grid power feed operation

WiFi Access Point

[stopped]
Activate WiFi ?
WiFi Access Point
[active]
The SS-ID (SS) and the password (PW) are displayed.
Deactivate WiFi AP ?
WiFi Access Point
[not available]
Is displayed, when no system monitoring is present at the invert-
er.
To activate the WiFi Access Point press the Enter key.
To deactivate the WiFi Access Point press the Enter
key.