Navigation In The Menu Level; Activating Display Illumination; Automatic Deactivation Of Display Illumination / Switching To The "Now" Display Mode; Accessing The Menu Level - Fronius Symo 10.0-3 208-240 Manual De Instrucciones

Navigation in the Menu Level

Activating Dis-
1
play Illumination
Automatic Deacti- If no key is pressed for 2 minutes:
vation of Display -
Illumination /
Switching to the -
"NOW" Display
Mode -
Accessing the
Menu Level
Menu Items
-
-
-
-
-
Values Displayed
Output power (W) - depending on the device type (MultiString), two output power values
in the NOW Menu
(PV1/PV2) are displayed after the Enter key is pressed
AC reactive power (VAr)
Grid voltage (V)
Output current (A)
Grid frequency (Hz)
Solar voltage (V) - from U PV1 and U PV2, if there is one
Press any key.
The display illumination is activated.
The SETUP menu item offers the choice between a permanently lit or permanently
dark display under "Display Settings."
the display illumination turns off automatically and the inverter switches to the "NOW"
display mode (if the display illumination is set to automatic)
the inverter can be switched to the "NOW" display mode from any menu level, except
for the "Standby" menu item
the current output power is displayed.
NOW displays real-time values
LOG displays recorded data from the current day, current calendar year, and since the
inverter was started for the first time
GRAPH daily characteristic curve graphically represents the course of the output pow-
er during the day. The time axis is automatically scaled. Press the "Back" key to close
the display
SETUP displays the Setup menu
INFO provides information on the device and the software
Press the "Menu" key
1
The display switches to the menu level.
Use the "left" or "right" keys to select
2
your preferred menu item
Press the "Enter" key to access the
3
desired menu item
25