Ryobi TSS120L Manual Del Operador página 16

TABLE EXTENSIONS
See Figures 13 - 15.
Table extensions have been provided for both the left and
the right side of the saw.
To install table extensions:
 Remove the screw from the end of the table extension.
 Insert the ends of extension into the holes in the sides of
the base.
 Replace screw and tighten to secure the extension in
place.
 Repeat for other extension.
TABLE
EXTENSION
BASE
ASSEMBLY
Fig. 13
16 − English
SAW VIEWED FROM BOTTOM
TABLE
BASE
EXTENSION
SCREW
TABLE
EXTENSION
BASE
Fig. 14
Fig. 15