Kit Assembly - Metra 99-7628BHG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
2. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
3. Attach the pocket to the radio
bracket assembly using (4) #8 x 3/8"
screws supplied. (Figure B)
4. Attach the climate control module
below the completed assembly using
the factory hardware. (Figure C)
99-7628BHG

Kit Assembly

(Figure A)
(Figure B)
5. Locate the factory wiring
harness and antenna connector
in the dash, and complete all
necessary connections to the
radio and climate controls. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Reassemble the dash in reverse
order of disassembly, using the
99-7628BHG radio housing
trim panel.
3
(Figure C)