JVC DLA-RS640 Guia De Inicio Rapido página 15

When the following messages appear...
Message
No Input
.
HDMI-1
.
Lamp replacement
Back
.
About Trademarks and Copyrights
®
Description
No device is connected to the input
0
terminal.
The input terminal is connected but
0
there is no signal.
A video signal that cannot be used with
this unit has been input (The names of
input terminals such as "HDMI-1" and
"HDMI-2" will be displayed in yellow).
Indicates that the lamp needs to be
replaced soon.
To clear the message, press the [BACK]
button on the operation panel of the
BACK
projector unit or the remote control.
HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LCC.
"x.v.Color" and the "x.v.Color" logo are trademarks of Sony Corporation
THX and the THX logo are trademarks of THX. Ltd.
ISF is a registered trademark of ISF (Imaging Science Foundation, Inc.).
Action
Input the video signals.
Input video signals that can be used.
(INSTRUCTIONS "Others" "
"Specifications" " "Types of Possible
Input Signals")
Get ready a new lamp unit and replace
as soon as possible. Reset the lamp time
after replacing the lamp.
(INSTRUCTIONS "Maintenance" "
"Replacing the Lamp")
15