Preparation
Checking the Accessories
Lens cover R ................................................................... 1 piece
* It is attached to the main unit at the time of shipment.
Remote control ....................................................................... 1 piece
AAA-size batteries (for operational check) ............................ 2 pieces
Power cord (for USA) (about. 2 m) ......................................... 1 piece
Power cord (for UK) (about. 2 m) ............................................ 1 piece
Power cord (for EU) (about. 2 m) ............................................ 1 piece
Quick User Guide (this document), safety precautions, warranty card, and other printed material are also included.
0
Be sure to read the "Safety Precautions" before using this projector.
0
Loading Batteries into the Remote Control
Loading the batteries
Removing the batteries
2
.
.
.
.
.
.
If the remote control has to be brought closer to the unit
0
to operate, it means that the batteries are wearing out.
Replace the batteries with new ones (AAA).
Insert the batteries according to the t s marks.
0
Be sure to insert the s end first.
When removing the battery, do so from the t end.
If an error occurs while using the remote control,
0
remove the batteries and wait for five minutes. Load
the batteries again and operate the remote control.
CAUTION
Do not put the remote control in a place with an
0
exposure to direct sun light or high temperature.
It may deformed due to heat, or the internal
components may be adversely affected resulting in
fire hazard.
Remove the batteries from the remote control when
0
storing the remote control.
Storing the remote control for a prolonged period
without removing the batteries can cause battery
leakage.
.
.