Connecting The Projector - JVC DLA-RS640 Guia De Inicio Rapido

Connecting the Projector

Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual of
0
the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
0
audio output device, such as an amplifier or speaker.
The images may not be displayed depending on the devices and cables to be connected.
0
A high speed HDMI cable (sold separately) that is HDMI-certified is recommended.
When using a standard cable, you are recommended to set the resolution of the equipment transmitting the video to
1080i or lower.
For details, refer to INSTRUCTIONS.
Some cables cannot be connected to this unit due to the size of their connector cover.
0
Connecting via HDMI cable
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
HDMI Cable (Sold Separately)
.
Connecting through an AV amplifier
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
HDMI Cable (Sold Separately)
.
Connecting the Power Cord (Supplied Accessory)
B
A Connect the power cord supplied to the power input terminal on
the main unit
B Insert the supplied power plug into the wall outlet.
The power consumption of this unit is large. Please connect it
0
A directly to the wall outlet.
When you are not using the projector, please unplug the power
0
cord from the outlet.
Power Cord
Connect it using only the power cord supplied.
0
(Supplied)
Do not use a voltage other than the indicated power voltage.
0
Do not damage, break or modify the power cord. Do not place a
0
heavy object on the power cord, or heat or pull it. Doing so may
damage the power cord.
Do not unplug the power cord with wet hands.
0
BD/DVD Recorder, etc.
BD/DVD Recorder, etc.
HDMI Cable
(Sold Separately)
Precautions to prevent fire and electric shock
Laptop, etc.
HDMI Output Terminal
Speakers
Speaker
Cable (Sold
Separately)
AV Amplifier
5