Safety Instructions; Inspection And Maintenance - KBT 189.00 Serie Instrucciones De Uso

INSTRUCTIONS FOR USE

SAFETY INSTRUCTIONS

1. Please keep this instruction sheet safely for future reference.
2. Inappropriate use or faulty application of the product is explicitly forbidden and absolves the manufac-
turer of all liability.
3. The use of the item is allowed only under continuous supervision by an adult. This product is suitable
for individuals weighing up to 100 kg (max. 600 kg).
4. This product meets all security aspects of the European standards EN1176-1&2:2008. This product is
fi t for use in commercial playgrounds, both indoor and outdoor.
5. The application of the item as part of a playframe or any other construction will have to be such that it
excludes all risks of entrapment.
6. The playframe or construction in which the item will be integrated, must also meet all relevant security
aspects of the European standards EN1176-1&2:2008.
7. The minimum distance from the bottom of the swing seat (when not in use) to the ground surface
should be 40 cm.
8. It is not advised to hang several swing seats to one swing construction.
9. The minimum distance between the swing seat and the frame should be 20% of the chain length plus
20 cm.
10. The critical free fall height equals the length of the chains divided by 2, plus the height of the swing seat
at rest.
11. When mounting or assembling the product, attention should be given that the impact area has the
minimum required distance between the product and eventual obstacles: walls, fencing,... The free
falling space should be like specifi ed by the grey area as shown in FIG I (see last page).
12. In these safety areas no hard, angular or pointed objects should be present. The safety surface under-
neath the product must be fl at, and be covered in a suitable way (eg. rubber tiles, bark, wood chips).
The product must not be placed on asphalt, concrete or any other hard surface. There cannot be an
overlapping of surrounding free spaces or safety areas.
13. Swing frames or their top bar should only be attached to other equipment where specifi c measures are
taken to segregare them from other activities. For example: an additional 150 cm free space, barriers, ...
14. Use swing hooks type 817.002 and a minimum beam thickness of 120 mm to attach these swing hooks to.
15. See page 10 and 11 for the assembly:
• In general, the distance of the suspension points is at least the width of the nest increased by 30%
of the suspension length.
• FIG II (example) : The distance between the attachment points at the top must be 1680 mm. Place
the safety pins 160 mm away from the main attachment points. The safety chain must be attached
to the main swing hook.
16. The nest swing must be suspended with two separate swing hooks (type 817.002, one swing hook per
suspension rope) that are spaced according to the specifi cations in FIG II. The nest swing can never
be suspended on a single point suspension swing hook.
17. When the suspension ropes of the nest swing need to be changed (for instance due to damage), the
bolt of the D-shackle of the suspension must be fastened and secured using thread-locking fl uid.

INSPECTION AND MAINTENANCE

The frequency of inspection and maintenance will vary with the type of equipment or materials used or
other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...).
Moving metal parts must be oiled regularly.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
2
nest swing 'rosette'
EN
1
14 mm
3
4
19
24
ASSEMBLY - MONTAGE - MONTAJE - MONTAGGIO - MONTAŻ
ASSEMBLY - MONTAGE - MONTAJE
MONTAGGIO - MONTAŻ
2
160 mm
18 mm
14 18
FIG II
a
Instructions for use - M189.00x.01 - nest swing 'rosette'
160 mm
min. 1680 mm
min. 1360 mm
min.
400 mm
b c
11