GRAPHITE 58G971 Instrucciones De Uso página 10

TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
RECIPROCATING SAW
58G971
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
● Whenever working tool can hit hidden electric wires or its own power
cord during operation, hold the power tool only by insulated surfaces
of the handle. Contact with power supply line may transfer its voltage
to metal parts of the power tool and cause electric shock.
● Keep hands at safe distance from the cutting area. Do not put them
under processed piece. Contact with blade may cause injury.
● Switch off the power tool after work. Remove blade from processed
piece only when it is at standstill. This way you can avoid recoil and it is
possible to safely put away the power tool.
● Use only undamaged blades in good technical condition. Bent, blunt
blades may break, additionally may affect cutting line and contribute
to or cause recoil.
● Dust of certain wood and metal types may be dangerous to health
and cause allergic reactions, respiratory tract illness or be carcinogenic.
– Use dust masks when cutting to protect your respiratory system
against produced dust.
– Use dust extraction system when cutting wood.
– Always provide good ventilation of your workplace.
● Do not cut water system pipes with the power tool. Cutting a pipe
may cause material damages or electric shock.
● Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
● Do not cut objects thicker than allowed in technical specification for
a given material.
● Hold the power tool in a closed hand.
● Ensure the power tool does not have contact with the material before
pressing the switch.
● Do not touch moving parts with your hand.
● Do not put away the power tool until it stops moving.
● Do not switch the power tool on when not holding it.
● Do not touch the blade or processed material immediately after the
work has been finished. Those elements may be hot and may cause
burns.
● When you see unusual behaviour of the tool or hear strange noises,
immediately switch off the tool and remove the plug from mains
socket.
● To ensure proper cooling keep ventilation holes in the power tool
body unobstructed.
● Before connecting the power tool to mains socket make sure the
supply voltage matches the voltage on the rating plate of the tool.
● Each time before connecting the power tool check the power cord, in
case of damage hand over to authorized workshop for replacement.
● Power cord of the power tool always must be on the safe side, where
there is no danger of accidental damage by operating power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
EXPLANATION OF USED SYMBOLS
1
4
Read instruction manual, observe warnings and safety
1.
conditions therein.
Device with class II insulation.
2.
Use personal protection measures (protective goggles, earmuff
3.
protectors, anti-dust mask).
Disconnect the power cord before starting maintenance or
4.
operation.
Protect against rain.
5.
Keep the tool away from children.
6.
CONSTRUCTION AND USE
Reciprocating saw is a hand-held power tool with insulation class II. It
is driven by a single-phase commutator motor. The tool is designed
for making straight, coarse cuts, curved cuts and holes in wood, wood-
based materials, plastics and metals (provided that appropriate blade
is used). Range of use covers repair and building works, and any work
from the range of individual, amateur activities (tinkering).
Use the power tool in accordance with the manufacturer's
instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
Blade
1.
Blade holder
2.
Carbon brush cover
3.
Switch lock button
4.
Switch
5.
Footplate fixing screws
6.
Footplate
7.
Main handle lock
8.
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
NOTE
WARNING
FITTING/SETTING
INFORMATION
EQUIPMENT AND ACCESSORIES
Blade
1.
Hexagonal key
2.
10
2 3
5 6
- 2 pcs
- 1 pce