Two-Circuit- / Three-Circuit Connection; Warming Zone - Teka FGKST 58 Serie Instrucciones Para El Uso Y Montaje

GB
Parboiling boost
Switch on the cooking zone by means of corresponding
!
cooking zone button . Press the Minus key
cooking level 9. Then switch on the parboiling boost by means
of the Plus key . During the parboiling stage, the cooking

level display switches continuously between the "A" sign
(parboiling boost) and the cooking level which has been set.
Now you can select the subsequent cooking level 1 - 8. If you
quit cooking level 9 without selecting a subsequent cooking
level from 1-8, then the parboil boost is shut off automatically
after 10 seconds. The parboiling boost time depends on the
subsequent cooking level which has been selected. Details
are given in the accompanying time chart.
If the Plus key is selected after the required subsequent
cooking level has been selected, the parboiling boost time is
adjusted upwards in accordance with the time chart. If the
"
Minus key is pressed after the required subsequent cooking
level has been deselected, the parboiling boost is stopped
beforehand.

Two-circuit- / three-circuit connection

Two-circuit- / three-circuit connection of the respective cooking zone can only be effected after the corresponding
cooking zone has been activated and switched on.
Select the desired cooking level 1-9 . Switch on the second heating element by means of the Multi-circuit key

The control lamp of the selected cooking zone lights up. Connect the third heating circuit by pressing the Multi-

circuit key once again. The second control lamp
activated in order to switch off the two-circuit- / three-circuit connection. The outer heating circuits are switched off
by pressing the Multi-circuit key

Warming zone

The warming zone is suitable for foods that have finished cooking and
which should be covered to keep them warm.
Operation of the warming zone is carried out with the Touch-Control switch.
Two keys have to be pressed in successive in order to switch on the
warming zone. First the key button has to be pressed (LED-1 lights up).
Now the I-key must be pressed within 6 seconds (LED-1 goes out/ LED-2
is lit), and the warming zone is switched on.
By pressing the 0-key the warming zone is then switched off again (LED-2
goes out).
Pot Recognition (PR)
If your range is equipped with Pot Recognition the PR will check whether a
metal pot is on the cooking zone after a cooking level has been selected. If no pot is recognized, a u will appear
in the display and the heating element will remain inactive. If a pot is now placed on the cooking zone within 10
minutes, the heating element will turn itself on and the selected cooking level will appear in the display. Cooking
zones with two-circuit heating or frying zone will automatically be re-powered, i.e., the PR also recognizes the size
of the pot. If no pot is placed on the cooking zone, the range will turn off after 10 minutes for safety reasons.
The PR recognizes only metal pots. To be able to cook with non-metallic cooking ware, as well, the PR can be
turned off for each cooking zone. To do this, the required cooking zone
selected. Now the Multi-circuit key
can now be done without PR. The two-circuit heating or frying zone can now be re-powered by means of the Multi-

circuit key .
To reactivate PR, turn off the cooking zone. When the cooking zone is turned on again, PR will again be active.
14
"
and select

lights up. The corresponding cooking zone must also be

once again. The control lamps

and then the corresponding cooking zone key
Table of times
PB = Parboiling boost,
time in minutes, seconds
Cooking level
1
2
3
4
5
6
7
8
9

are then no longer lit.
! 
must be activated
!
should be pressed. Cooking
PB (min:sec)
01:00
03:00
04:48
06:30
08:30
02:30
03:30
04:30
—:—

.
and a cooking level
223279