Dimensions And Weight; Operating Instructions; Water Temperature; Maximum Pressure And Flow Rate - Pratissoli KE Serie Manual De Uso Y Mantenimiento

6

DIMENSIONS AND WEIGHT

For Standard Version pump dimensions and weight, refer to Fig. 2.
Dry weight 36 kg.
7

OPERATING INSTRUCTIONS

The KE pump has been designed to operate with
filtered water (see par. 9.7) and at a maximum
temperature of 40°C.
Other liquids can be used only upon approval by the
Technical or Customer Service Departments.
7.1

Water temperature

The maximum permissible water temperature is
40°C. However, the pump can be used with water up
to a temperature of 60°C, but only for short periods.
In this case, it is best to consult the Technical or
Customer Service Departments.
7.2

Maximum pressure and flow rate

The rated specifications stated in our catalogue are the max.
that can be obtained by the pump. Independently of the
power used, the maximum pressure and rpm indicated in
the specification label can never be exceeded unless upon
prior authorisation by our Technical or Customer Service
Departments.
7.3

Minimum rotating speed

Any rotating speed other than that indicated in the
performance table (see chapter 5) must be expressly
authorised by our Technical or Customer Service
Departments.
7.4

Brands and types of oils recommended

The pump is supplied with oil suitable for room temperatures
from 0°C to 30°C.
Some types of recommended oil are indicated in the following
table, these oils have additives to increase corrosion resistance
and fatigue resistance (DIN 51517 part 2).
Alternatively you can also use Automotive Gear SAE 85W-90
oil for gearing lubrication.
Manufacturer Lubricant
AGIP ACER220
Aral Degol BG 220
BP Energol HLP 220
Manufacturer Lubricant
CASTROL HYSPIN VG 220
CASTROL MAGNA 220
Falcon CL220
ELF POLYTELIS 220
REDUCTELF SP 220
NUTO 220
TERESSO 220
FINA CIRKAN 220
RENOLIN 212
RENOLIN DTA 220
Mobil DTE Oil BB
Shell Tellus Öl C 220
Wintershall Ersolon 220
Wintershall Wiolan CN 220
RANDO HD 220
TOTAL Cortis 220
22
Fig. 2