Technical Specifications - Targa WAL 14 A1 Manual De Instrucciones

WAL 14 A1

4. Technical specifications

The rating plate for the outdoor camera can be found on the mounting plate (10).
LED emitter
Model name:
Operating voltage:
Total power consumption:
Power consumption of light without
auxiliaries:
Lights:
Luminous flux:
Colour temperature:
Energy efficiency class of LED emitter:
Adjustable light time:
For movement sensor:
Max. area projected:
Operating position:
Ambient temperature:
Safety class:
Degree of protection:
Dimensions (W x D x H):
Weight:
Camera:
Resolution:
Frame rate:
Viewing angle:
Micro SD card (not included):
Movement sensor:
Sensor detection angle:
Sensor range:
Light sensitivity:
Swivel range (mechanical):
WiFi / Control app L-Guard HD
WiFi standard:
WiFi frequency band:
Wi-Fi transmission power:
App compatibility:
The technical data and design may be changed without prior notice.
28 - English
WAL 14 A1
220 – 240 V
approx. 20 Watt
approx. 18 Watt
28 LEDs at 0.5 W each
approx. 1250 lumen
Approx. 5,000K
A+
Approx. 10 sec. (+/- 5 sec.) to approx. 20 min. (+/- 5 min.)
Manual setting: 3 hours, 6 hours or continuous when dark (adjustable using
twilight sensor)
Approx. 50 m² if mounted at height of approx. 2.50 m
Vertical – LED-emitter on top, movement sensor underneath
-33°C - + 40°C
I (with ground wire connection)
IP54
approx. 179 x 165 x 256 mm
approx. 920 g
1280*720 pixels
1-20 images per second (adjustable)
Approx. 94° horizontal, approx. 48° vertical
Class 10, max. 128 GB
Max. 180°
Max. 10 m
Adjustable using the app
Approx. 120° horizontal
802.11 b / g / n
2.4GHz
approx. 8.7 mW
iOS 8.0 (and higher) / Android 4.4 (and higher)
, 50 Hz
~