Targa WAL 14 A1 Manual De Instrucciones página 37

WAL 14 A1
Now screw in the screws to fix the mounting
plate (10) securely to the wall.
Now properly wire the power cable to the
connection terminal on the mounting plate (10).
Note the labelling of the individual terminals.
Then fix the cable by fitting the strain relief with
the 2 screws.
Place the outdoor camera straight on the
mounting plate (10). Press the catch (9) down
and push the outdoor camera towards the wall
until the catch (9) slots into the recess in the
camera housing.
English - 35