Before You Start; The Right Place For Mounting; Tools Required; Before Mounting - Targa WAL 14 A1 Manual De Instrucciones

WAL 14 A1

7. Before you start

Remove the outdoor camera and mounting fittings from the packaging.
Check the outdoor camera for damage. If the outdoor camera is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.

7.1. The right place for mounting

When selecting the place for mounting, make sure that the camera is mounted
within the range of the WiFi network used. If necessary, use a smartphone or
tablet to test this.
Select a location carefully and prepare well before mounting.
 Place all the individual parts, tools required and fittings tidily so everything is ready to hand.
 The outdoor camera must only be mounted on stable surfaces such as walls.
 The power supply must be via the building's electrical circuit.
 Do not mount the outdoor camera above a heat source or in the immediate vicinity of other light
sources.
 Select the location so that the outdoor camera is protected against wind, rain and dirt.
 Find out in advance what fittings are suitable for the location you have chosen. Suitable fittings for
mounting on concrete are provided.

7.2. Tools required

The following tools are not supplied. This list is a guide only. The actual tools you will require depend on
the individual location.
 Ladder
 Voltage tester
 Spirit level, folding rule, pencil
 Drill and drill bits
 Phillips screwdriver, flat screwdriver
 Combination pliers, wire cutters

7.3. Before mounting

DANGER! The unit must only be mounted by an authorised electrical engineer! The power
supply must be via the building's electrical circuit.
32 - English