Mounting - Targa WAL 14 A1 Manual De Instrucciones

DANGER! Power must be switched off during the mounting process!
WARNING! When drilling holes, make sure there are no cables in the walls.
 Before mounting the outdoor camera, make sure you are familiar with all its individual parts and read
and observe the instructions and diagrams in these operating instructions.
 Make sure that the cable to which the outdoor camera is to be connected is not live. To do this,
remove the fuse for the relevant power circuit or switch the circuit breaker to the "0" position in your
fusebox.
 Make sure that you also test that the cable is not live using a voltage tester!

7.4. Mounting

The outdoor camera must be wall-mounted.
Disconnect the power supply.
Undo the mounting plate (10) from the outdoor
camera by removing the screw (11) using the
screwdriver (B).
WAL 14 A1
English - 33