Maintenance/Cleaning; Troubleshooting - Targa WAL 14 A1 Manual De Instrucciones

WAL 14 A1

9. Maintenance/cleaning

Maintenance
The outdoor camera does not contain any parts that require maintenance.
Cleaning
DANGER! The mains power must be switched off for all work on the outdoor camera, even
cleaning! Otherwise there is a risk of electric shock!
DANGER! Make sure that no liquid gets into the housing of the outdoor camera. Otherwise
there is a risk of electric shock.
Occasionally, clean the white cover of the LED emitter (1) with a soft, damp cloth to achieve the best
lighting.
To guarantee a consistently good image quality, keep the camera unit (3) on the outdoor camera clean.
Only use a soft cloth and glass cleaner to clean the camera lens.
Never use abrasive detergents or those containing solvents, nor hard brushes or sponges which could
scratch the surface.

10. Troubleshooting

The light does not come on
 The movement sensor (7) is not aimed correctly. Correct the positioning.
 The electrical connection is faulty. Get the electrical connection checked by an electrician.
The light switches on and off quickly
 There is interference to the sensor from other light sources or bright reflective surfaces. Remove the
external light source or reflective surface.
The light does not switch off
 There are people or moving objects in the detection range of the movement sensor (7). Remove them.
 The outdoor camera is moving in the wind, which is constantly triggering the movement sensor (7).
Always secure the outdoor camera to a stable mounting point.
Faulty recordings / No recordings
 Faulty recordings of various kinds can be linked to a faulty Micro SD card. Therefore, if your
recordings are faulty, try putting a Micro SD card that you know works in the camera. The procedure
is the same if there are no recordings.
44 - English