Operating Instructions - Kobalt KXCS 124B-03 Manual De Instrucciones

OPERATING INSTRUCTIONS

1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves on the bottom of the tool,
then slide the battery pack onto the tool, as
shown.
b. Make sure that the latches on the battery
pack snap into place and the battery pack is
secured to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull backward on the battery pack to remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the tool is not in use or when carrying the saw at your side.
2. Trigger Switch
a. To turn the saw ON, press the lock-off button
(C), and then squeeze the trigger switch (A).
WARNING
• The blade should reach full speed before it
comes into contact with the workpiece.
b. To turn it OFF, release the trigger switch and
allow the blade to come to a complete stop.
Electric Brake
The circular saw is equipped with an electric
brake, when the trigger switch is released, the electric brake engages automatically to quickly
stop the blade rotation.
1
2
11
Battery-release
buttons
A
C