Wilo Control EC-Booster Instrucciones De Instalación Y Funcionamiento página 72

en
Fig. 45: Menu 5.59
Fig. 46: Menu 5.60
Fig. 47: Menu 5.61
Fig. 48: Menu 5.62
Fig. 49: Menu 5.63
Fig. 50: Menu 5.68
Fig. 51: Menu 5.69
72
Commissioning
Menu no. 5.59
Description Collective fault signal (SSM) function
Value range fall, raise
Factory setting raise
"fall": The relay drops out. This function can be used to
Explanation monitor the mains voltage supply.
"raise": The relay picks up.
Menu no. 5.60
Description Pump cycling
Value range on, off
Factory setting on
Menu no. 5.61 (Control ECe-Booster only)
Description Zero-flow test
Value range on, off
Factory setting on
Menu no. 5.62
Description Dry-running protection: Switch-off time delay
Value range 0 ... 180 s
Factory setting 15 s
Menu no. 5.63
Description Dry-running protection: Reactivation time delay
Value range 0 ... 1800 s
Factory setting 10 s
Menu no. 5.68 (Control EC-Booster only)
Description Mains connection rotating field monitoring On/Off
Value range on, off
Factory setting on
NOTICE! Switch off during alternating current connection!
Menu no. 5.69 (Control EC-Booster only)
Description Motor current monitoring On/Off
Value range on, off
Factory setting on
NOTICE! Switch off during alternating current connection!
WILO SE 2019-07