SATA SATAjet 1000 A RP Instrucciones De Servicio página 19

Operating Instructions Extensions jet 1000 A RP, B RP, K RP
Content [Original Version: German]
1. Notes .....................................19
2. Intended Use .........................19
3. Versions .................................19
4. Scope of Delivery ..................19
5. Assembly, installation and
1. Notes
Notice!
Read and comply with all listed warnings and safety instructions togeth-
er with the general information in the operating instructions for the spray
gun. Failure to comply or incorrect compliance can result in malfunctions
or cause injuries.
Notice!
SATA extensions are supplied ready assembled to a length of
≤ 1000 mm.
SATA extensions from a length of > 1000 mm are supplied by SATA
pre-fitted and must be assembled ready for use by the customer.
2. Intended Use
The SATA extensions act as spraying aids for spray guns type SATA-
jet 1000 A / B / K when applying paints and varnishes together with other
suitable, flowable materials on suitable substrates at inaccessible points.
3. Versions
The SATA extensions are supplied with various spray geometries, spray
directions and nozzle sizes and in differing lengths.
4. Scope of Delivery
■ Extension, in pre-fitted modules
or ready assembled, depending on variety and version.
■ Loctite 276
■ Supplement
5. Assembly, installation and removal
5.1. Standard nozzle (0°)
Round/flat fan [1-9]
When the extension is fitted, it is not possible to proceed with fully varia-
removal ..................................19
6. Care and storage ...................23
7. Spare Parts ...........................23
19