Operating Instructions for jet 1000 A RP, B RP, K RP Extensions
■ Coat external thread of paint needle module [3-7] with Loctite 276.
■ Thread together paint needle modules [3-6] and [3-7] all the way and
tighten.
Attaching to paint spray gun
■ Thread paint tube [3-8] into paint spray gun and tighten with universal
wrench [3-12] .
■ Use adapter [3-10] to thread air tube [3-11] onto paint spray gun and
tighten.
■ Slide paint needle [3-9] into paint spray gun and attach as described in
the paint spray gun operating instructions.
Disassembling the paint spray gun
■ Pull paint needle [3-9] out of paint spray gun as described in the paint
spray gun operating instructions.
■ Unscrew air tube [3-11] from paint spray gun by way of adapter [3-10]
and remove carefully.
■ Use universal wrench [3-12] to unscrew paint tube [3-8] from paint
spray gun and remove carefully.
5.4. Rotary nozzle (360°)
Information!
Use with air-supplied feed line only!
Assembly
■ Coat external thread of air pipe module [4-3] with Loctite 276.
■ Thread together air tube modules [4-3] and [4-4] all the way and
tighten.
■ Coat external thread of paint tube module [4-6] with Loctite 276.
■ Thread together paint tube modules [4-6] and [4-7] all the way and
tighten.
■ Coat external thread of paint needle module [4-9] with Loctite 276.
■ Thread together paint needle modules [4-8] and [4-9] all the way and
tighten.
Attaching to paint spray gun
■ Thread paint tube [4-10] into paint spray gun and tighten with universal
wrench [4-14].
■ Use adapter [4-12] to thread air tube [4-13] onto paint spray gun and
76