Check Weighing; Accumulated Total - Uline H-1649 Manual De Instrucciones

PArts cOuntInG cOntInuEd
5. Press the ZErO/EntEr key when the displayed
number matches the number of items used in the
sample. As more weight is added, the display shows
the number of pieces (pcs).
6. Press the % key to display the unit weight (g/pcs),
total weight (kg) or the count (pcs).
7. Press the Func key to return to weighing mode.
NOTE: See uline.com for parts counting
instructional video.

cHEcK WEIGHInG

check Weighing sounds an alarm when the weight on
the scale exceeds limits stored in the memory. High and
low limits can be set and can be used individually or
together.
Setting the High Limit:
1. Press the lImIt key. display shows the current High
limit. left most number is flashing and the HI icon
is on.
2. to change the High limit, press the %/< and the
lImIt/> keys to select which number to change.
3. Press the tArE/^key to change the flashing number.
4. Press ZErO/EntEr key to set the number.
5. If you need to reset the number to zero, press the
Func/c key.
Setting the Low Limit:
1. After pressing ZErO/EntEr key, display then shows
the low limit, lO will be on (left side of display.)
2. to change the low limit, press the %/< and the
lImIt/> to select which number to change.
3. Press the tArE/^key to change the flashing number.
4. Press ZErO/EntEr key to set the number.
5. If you need to reset the number to zero, press the
Func/c key.
6. After pressing the ZErO/EntEr key, the scale returns
to weighing mode with the check-Weighing function
turned on.
7. When a weight is placed on the scale, arrows
indicate if the weight is over or under the limits and
a beeper sounds.
PAGE 4 OF 18
OPERATION CONTINUED
Both Limits set:
• the display shows OK when the weight is within
Low Limit set, High Limit set to zero:
• display shows OK when weight is under the limit.
High Limit set, Low Limit set to zero:
• display shows lO when weight is less than the High
Both Limits set, Low is set greater than High:
• the beeper will never sound and display shows lO
To disable Check Weighing:
1.
2. Press the Func/c key to enter zero into both limits

AccumulAtEd tOtAl

scale can be set to accumulate automatically or
manually.
To set automatic or manual accumulation:
1.
2. Press lImIt/> key to scroll through options until Au On
3. Au On means automatic accumulation is on.
4. Au OFF means scale is set for manual accumulation.
5. Press tArE/^ key to toggle between Au On and Au
6. Press ZErO/EntEr key to set your selection.
7.
the limits.
shows HI when above the low limit.
limit. Above the High limit display shows OK.
if the weight is less than the lO limit. display shows
HI if the weight is greater than the lO limit.
NOTE: The weight must be greater than 20
scale divisions for Check Weighing to operate.
Press the lImIt key to display current limits.
when the current limits are shown, then press the
ZErO/EntEr key to store the zero values.
Press Func and Acc keys simultaneously.
or Au OFF is displayed.
OFF.
Press Func key to exit.
NOTE: Even when the scale is set to display
grams or ounces, the accumulate function
still keeps weight in kilograms or pounds.
0613 IH-1649