Normal Running Screens - VQ OrthoCare Avid IF2 Manual Para El Paciente Y Para El Médic

Normal Running Screens

1. The top of the screen displays the battery status, the "home" button and
the time. While treatment is running, the Home button (  ) will return you
to the Select Protocol Screen. When treatment is off, the Settings icon
(  ) will be in the top middle of the screen.
2. The middle of the screen displays the
intensity of the stimulation.
3. Below the intensity is the timer. For programs
with a set time, it will count down. For
continuous programs, the timer will count up.
4. The bottom right corner is the increase 
stimulation button.
5. The bottom left corner is the decrease 
stimulation button.
6. The bottom middle is the pause button  .
7. These are the screens that appear during most of your treatment time.
Press the  or  button to change stimulation intensity. For your safety,
the keypad locks after 30 seconds of inactivity. If you see the lock in
the middle of the lower line, pressing the display anywhere below the
top row will show the unlock icon (  ), which can be pressed to unlock
the device) You can then increase the intensity.
10 | Avid IF2 Patient Manual