Controls And Features; Settings Menu - VQ OrthoCare Avid IF2 Manual Para El Paciente Y Para El Médic

Controls & Features
The Avid IF2™ is a touch screen device, allowing the user to control the
device on the screen and providing information regarding its operation and
status. Virtually all of the functions of the device are viewed and controlled
via a finger touch on the screen.
The " " button at the bottom will turn the device on. Pressing and holding
this button will turn the device OFF.
Main Display Screen

Settings Menu

1. Display: Language, Brightness, Audible beep, Night
Mode, Compliance Display.
2. Bluetooth: Enable connection (Avid IF2 is bluetooth
ready) and Last Connection Date. During stimulation,
the bluetooth function is automatically disabled.
3. Time/Date: Set clock to 12 or 24 hr, set time and date
4. Tools: This is used by clinicians and technicians to
program your device.
The settings function will only display when treatment is
not running.
 The battery symbol in the upper left corner will display
the battery status. Press on the battery and the screen will
show you the battery life available and whether or not the
device is using the AC adapter.
 This button accesses the settings for the device.
The Time is displayed in the upper right corner of the screen.
The number in the middle of the screen is the protocol.
You may have one or more to choose from, depending on
your physician's prescription.
 Increases the protocol number on the screen.
 Decreases the protocol number on the screen.
 Selects the setting shown on the screen.
Avid IF2 Patient Manual | 7