VQ OrthoCare Avid IF2 Manual Para El Paciente Y Para El Médic página 13

8. When the intensity is equal to or greater than 10 mA, a "Vector" symbol
( ) will appear under the clock and the stimulation can be vectored.
Press the symbol, then adjust the stimulation to the right or left until
you feel it concentrated where you have the most pain. The intensity
of one channel will increase while the other channel will decrease. This
targets the stimulation so that it concentrates where you have the most
pain. The
9. At any time, you can press the pause button to pause stimulation. The
screen will show a pause sign at the bottom and a "Play" button (  ) in
the middle to resume treatment. The intensity will slowly increase from
zero up to its last setting. If locked, you need to touch screen once to
wake the device and second time to make a change.
10. If at any time you wish to discontinue treatment, press the  button at
the top. The screen will show a stop sign and a play button. Press the stop
sign to stop treatment and return to the main treatment screen. Press the
play button to resume treatment. Alternatively, you can press and hold the
on/off button and the device will turn off completely.
symbol rotates to indicate channels are vectored.
Avid IF2 Patient Manual | 11