VQ OrthoCare Avid IF2 Manual Para El Paciente Y Para El Médic página 17

To manually connect to the the app:
1. The app can be used to adjust your display settings.
It can only adjust the device when it is connected.
2. From the Device Information Screen (Figure G),
choose "Settings" at the bottom of the screen.
You can change the language, brightness, audible
alarm, and sleep mode. These settings are also
adjustable on the device.
To view your data on the app:
1. From the device Information Screen, press Usage Data at the bottom
of the screen. You will see each preset that has been used in treatment
as well as the questions that are asked and answered on the device.
2. To only see treatments, press "Usage" at the top of the page. Press
any individual treatment line to see the details of that treatment.
3. To only see outcome questions, press "Questions" at the top of the
page. Press any individual question line to see specific answers. If a
question was not asked, you will see "UA" for "Unasked."
To disconnect your device from the app:
From the Device: Turn the Avid IF2 off by pressing and holding the
From the App: Press the two plugs in the upper right corner of the screen.
Connected
Not connected
If you have any problems with the app, please contact Customer Service
at (800) 452-7993.
Figure G
.
Avid IF2 Patient Manual | 15