Moulinex Compact Chef Manual Del Usuario página 25

• Fitting the lid assembly
The appliance's lid is made up of three parts: the motor-unit lid (D1), the seal-mounting cup
(D2) and the sealing ring (D3).
These 3 items come assembled.
For your future uses, there are two ways to assemble the lid:
Steps
1
Place the jug (F) on the base of the appliance (A), holding the handle (F1) (Fig. 2).
2
Place the sealing ring (D3) on the seal-mounting cup (D2) (Fig. 19).
3
Clip the cup (D2) to the motor-unit lid (D1),
making sure you position the tab (D1a) of the
motor unit at the edge of the notch (D2a)
on the cup (D2), and press until you hear a
"click" (Fig. 5). The cup is now in place.
4
Place the assembled motor-unit lid (D1, D2+D3)
on the jug (F), making sure you position:
- the "open padlock " symbol
the handle (Fig. 6)
- the notches (D2a) of the cup around the
handle (F1) and rear column (A1) (Fig. 7)
Scenario 1
in front of
Place the cup (D2) on the jug making
sure you align the notches (D2a) of the
cup (D2) with the handle (F1) and rear
column (A1) (Fig. 20)
"click"
Fit the motor-unit lid (D1) on the cup
(D2), making sure you position the "open
in front of the handle (F1) and
padlock"
press until you hear a "click" (Fig. 21).
23
Scenario 2
EN