Moulinex Compact Chef Manual Del Usuario página 26

Steps
EN
5
To lock the lid in place position the "locked padlock"
do this, with one hand, turn the cover assembly in a clockwise direction so as to slide
the motor unit locking tab (D1a) into the handle (F1): To do this, with one hand, press
lightly on the cover assembly while you turn it in a clockwise direction so as to slide
the second locking tab (D1a) into the rear column on the base (A). (Fig. 8).
!
The lid should only be fitted if the sealing ring is placed on the seal-mounting cup (Fig.
19) and if the self-mounting cup is fixed to the motor-unit lid.
• Switching on
1. Select the
(B1, B2,
pressing on
(Fig. 9). To select the different sub-programs,
press the program button again to scroll
through the sub-programs (e.g: soup P1 = 1
press; soup P2 = 2 presses etc.).
2. Press the start/stop/reset button (B9) to
launch the program (Fig. 10).
The appliance only starts if the jug is correctly
positioned on the base and if the motor-unit lid
assembly is correctly positioned on the jug.
In the event of incorrect positioning of the
jug or poor locking of the lid, the control
panel will flash when you try to launch a
programme (Fig. 11).
Scenario 1
desired automatic
B3, B4, B5, B7)
the corresponding
Disassembling the lid:
program 1. Unlock the lid assembly, by turning the lid in
by an anti-clockwise direction so as to bring the
open padlock opposite the handle (Fig. 22).
button
2. Lift the lid with one hand and with the other
pull the cup to separate it from the motor
unit (Fig. 18).
3. Remove the sealing ring (Fig. 19).
24
Scenario 2
opposite the handle (F1): To