i
Information
• Press the "Let-down" button
phase if necessary. If milk has not begun to flow after two successive stimulation phases,
the mother should take a break and try again in 15 to 30 minutes. Also, she could try
breast massage and then pump using the expression phase.
2. Set the maximum comfort vacuum (see section 6.5).
Æ The drops on the display show the vacuum level.
The more drops, the stronger the vacuum.
3. The pump will automatically switch to the expression
phase after two minutes.
4. If the milk starts to flow sooner, press the Let-down
button
to change to the expression phase.
5. Set the maximum comfort vacuum (see section 6.5).
Æ The bars on the display show the vacuum level.
The more bars, the stronger the vacuum.
6. Continue pumping until the breast feels well drained
and soft all over (Medela recommends a pumping
time of at least 15 minutes).
7. Switch off the pump by pressing the on/off button
to revert from the expression phase to the stimulation
23
.