Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting re
Initial Settings for
6 Click the
3 Move the
Notes
DVD player
mark display
.
ON/OFF
Calling up the SET UP MENU
The parental lock level is set.
When the remote control operation switch is set
You can use this menu to change audio, subti-
The currently set option is indicated the mark
• If the selected language is not recorded on
to
, changing the remote control code type
DVD
tle, parental lock and other DVD settings.
" ". The option selected with the joystick is
the disc, languages specified on the disc are
Notes
enables you to operate the Pioneer DVD player
This menu can be operated only by using the
displayed.
indicated in blue.
by the supplied remote control. There are three
remote control when it is set to
• You can also switch the subtitle language
• We recommend to keep a record of your code
remote codes, code type
during playback with
4 Click the joystick.
number in case you forget it.
code type
.
DVH
33.)
Angle mark display is set ON/OFF.
• The parental lock level is recorded on the disc.
When using this unit with a Multi-DVD Player
• Even if you use
You can confirm it by looking at the disc pack-
SUBTITLE
(e.g. XDV-P9
), select code
tle language, this does not affect the settings
age, included literature or on the disc itself.
II
Notes
When using this unit with a DVD Navigation
With discs that do not feature a recorded
here.
Unit, select code
.
B
• Pressing
• You can also switch the angle during playback
parental lock level, you cannot use parental
takes you back to the previ-
RETURN
When using this unit only, select code
ous display.
with
lock.
. (Refer to page 33.)
ANGLE
• Pressing
• With some discs, parental lock operates to
takes you back to the previ-
RETURN
1 Set the remote control selection switch on
skip certain scenes only, after which normal
ous display.
the left side of the remote control to the
When you select OTHERS
playback resumes. For details, refer to the
appropriate position with a pen tip or other
disc's instructions.
When you select
OTHERS
pointed instrument .
• Pressing
takes you back to the previ-
RETURN
input display is shown. Refer to Language code
• If you select
mode, there is no need to
DVH
ous display.
Setting for digital output
chart for DVD on page 92, using the number
take the following procedure.
SET UP MENU
(DIGITAL OUTPUT)
buttons to input the four digit code of the
• If you select
mode, take the following
A/B
Shows the set up menu status.
desired language, then click the joystick.
procedure and change the code type to the
Changing the level
Set digital output correctly to match the compo-
appropriate type.
nents you are using with this unit. There is no
You can change the set parental lock level.
Note
need to change settings if this unit is not con-
2 Pressing
and
on the remote control
7
0
nected for digital output.
• Pressing
cancels the input numbers.
1 Move the joystick up/down to select
CLEAR
simultaneously changes the code type.
.
PARENTAL
Initially, the code type is set to
is indicated in blue.
PARENTAL
Precaution
Each time you press
and
7
the remote control the code type changes
• Incorrect setting may result in noise and dam-
2 Click the joystick.
between
and
.
A
B
age to speakers so be sure to read the manu-
Parental lock setting menu is displayed.
als of the connected components.
3 Press
buttons to input the regis-
NUMBER
1 Move the joystick up/down to select
tered code number.
in the second
DIGITAL OUTPUT
is indicated in blue.
DIGITAL OUTPUT
2 Click the joystick.
Digital output setting menu is displayed.
Downloaded from Caradio-Manual.com Manuals
Downloaded from Caradio-Manual.com Manuals
Downloaded from Caradio-Manual.com Manuals
Downloaded from Caradio-Manual.com Manuals
Downloaded from Caradio-Manual.com Manuals
All manuals and user guides at all-guides.com
mode.
DVD
, code type
and
A
B
. (See page
SUBTITLE
to switch the subti-
.
A
.
DVH
, a language code
.
A
simultaneously on
0
SET UP MENU
If you forget your code number
Setting the audio language
3 Move the joystick up/down to select the
4 Click the joystick.
1 Press .
desired digital output setting.
This enters the code number, and you can now
(AUDIO LANG.)
Refer to Changing the Level, step 3 on page 73,
The currently set digital output setting is indi-
change the level.
2 Press
MENU
and press
CLEAR
• If you input an incorrect code number, the
cated the mark " ". The digital output setting
The
SET UP MENU
You can set the preferred audio language.
The registered code number is canceled, letting
prohibited mark "
selected with the joystick is indicated in blue.
you register a new one.
Press
and input the correct code num-
3 Press
.
CLEAR
1 Move the joystick up/down to select
ber.
The second
SET UP MENU
Digital output
.
AUDIO LANG
• If you forget your code number, refer to If you
• To switch to the first
is indicated in blue.
AUDIO LANG.
Dolby D/LPCM
forget your code number on page 77.
.
2 Click the joystick.
5 Move the joystick left/right to select the
An audio language menu is displayed.
Note
desired level.
• If you press
MENU
3 Move the joystick up/down to select the
6 Click the joystick.
, the
MENU
SET UP MENU
desired audio language.
LPCM
The new parental lock level is set.
unit returns to the previous display.
The currently set language is indicated the mark
" ". The language selected with the joystick is
indicated in blue.
Note
Returning to the previous display
• To switch to the second audio language
• Pressing
RETURN
menu, press
The
SET UP MENU
ous display.
• To return to the first audio language menu,
displays of different setting options. To continue
4 Click the joystick.
press
.
performing different settings, or if you make a
The selected digital output setting is set.
mistake during setting, pressing
When playing DVDs enabling parental
4 Click the joystick.
you back to the previous display each time you
lock
The audio language is set.
Notes
press it.
When you play a disc featuring parental lock,
• Linear PCM output of DTS audio is not possi-
code number input indications may be
ble. If you select
Notes
displayed. If this happens and you do not input
put.
• If the selected language is not recorded on
the correct code number, playback will not
• When using this unit with a Pioneer Multi-
the disc, the language specified on the disc is
begin.
channel processor with digital input (DEQ-
output.
P7000), select
• You can also switch the audio language dur-
• Pressing
RETURN
ing playback with
ous display.
• Even if you use
.
language, this does not affect the settings
here.
• Pressing
RETURN
ous display.
• If you have selected
you select OTHERS on this page.
when the disc is stopped.
10 times.
is displayed.
" is displayed.
is displayed.
Setting detail
, press
SET UP MENU
Select when using a Dolby
Digital compatible amp and
decoder. The Dolby Digital
signal is output as it is. (Initial
setting)
during display of a
is canceled and the
Select when using an amp and
decoder that are not Dolby
Digital compatible. The Dolby
Digital signal is converted to
and output as a linear PCM
signal.
takes you back to the previ-
.
lets you switch between
RETURN
, DTS audio is not out-
LPCM
.
Dolby D/LPCM
takes you back to the previ-
. (Refer to page 32.)
AUDIO
to switch the audio
AUDIO
takes you back to the previ-
, refer to When
OTHERS
Section
Section
Section
Section
Section
10
10
10
10
10
SET UP
takes
En
69
Publicidad
Capítulos
Tabla de contenido
