Via Sensors; Extension Operation Via Sensors - ABB 6402U-500 Manual De Instrucciones

Operation
5.4 Operation via Sensors (Operating Modes 2 - 5)
After interruption of the supply voltage or connection to the
supply, Insert 6402 U-500 switches the connected con-
sumers connected of Output K1 on again
- irrespective of the brightness measured
- for 80 seconds when FM Sensors 6810-xxx-10x-500
are used,
- for the selected period (at least 1 minute with time-
setting < 1 minute) (with the exception of the short-
time impulse

5.5 Extension Operation via Sensors

(Operating Modes 2 - 5)
This type of extension operation only has an effect on
Output K1; Output K2 switches according to the operating
mode set (s. Chapter 4.4). Extension operation is possible
by
- activating via the NO-contact pushbutton, or
- Extension Insert 6805 U-500.
).
GB
81